Products |
Ensor Roser |
Spany The SPANY roof system can improve the look of any building. It is available in 5 different colours. With its overlapped and interlocked installation system, SPANY is designed and manufactured to protect any building from extreme weather conditions.
SPANY Roofing System is suitable for Roofs for Traditional and Non-Traditional Housing (including extensions), Flat roof conversions, Commercial applications including over roofing and Public Sector roofing applications.
SPANY Roofing System gives many other benefits: manufacture of the roof tile produces approximately 50% less CO2 than production of traditional Clay or Concrete tiles.
As a metre of SPANY tiles weigh only 16% of a metre of clay tiles less fuel is consumed delivering to the site.
At the end of their life, SPANY tiles are 99% recyclable. No landfill required.
From a health and safety perspective, using SPANY lightweight roof tiles on site give massive benefits to roofing contractors at all stages of development.
It is possible to lay twice the metrage of SPANY roof tiles as conventional slate or clay tiles in the same time.
Due to their light weight and size, SPANY roof tiles can also be used in modular construction developments where the major roof structures are manufactured off site.
Lifetime cost and product defects are much lower with SPANY roof tiles than compared to traditional roof tiles.
Each SPANY tile measures 1335mm long. 2.2 tiles equate to 1m2 of coverage.
A SPANY tile is about 16% of the weight of a conventional clay or concrete tile.
SPANY can be cut, bent and shaped to meet the most demanding roof design from 12 degrees to 90 degrees pitch.
SPANY is tested to withstand severe weather conditions involving wind, rain, snow, salt, heat and cold. |
 |
 |
 |
 |